Application example for discussing a method. This is not a customer test report or a fixed recipe. Confirm conditions, methods and acceptance requirements before use.
Position the specimen and add resin
Use a suitable transparent mold and a compatible UV curing resin.
Set the process
Set time and power according to the resin, specimen and equipment instructions.
Start curing
Start the equipment to perform specimen feeding and curing.
Cool and unload
Allow the specified cooling and unloading cycle before the next preparation stage.
Instrument references
Records to retain
- Specimen ID, material, sampling position and orientation.
- Instrument model, consumable batch, actual settings and operator.
- Surface condition, observations and corrective actions at each stage.
- Images, raw measurements and the method version used.
Interpreting results
Evaluate results against the agreed method and acceptance requirements. No measured outcomes or customer results are asserted by this example.
Source reference www.cnnoet.com ↗ · Compiled from public references; see the source link